home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
kermit.columbia.edu
/
kermit.columbia.edu.tar
/
kermit.columbia.edu
/
newsgroups
/
misc.19941221-19950208
/
000319_news@columbia.edu_Sun Jan 29 15:33:52 1995.msg
< prev
next >
Wrap
Internet Message Format
|
1995-07-31
|
3KB
Received: from apakabar.cc.columbia.edu by watsun.cc.columbia.edu with SMTP id AA16961
(5.65c+CU/IDA-1.4.4/HLK for <kermit.misc@watsun.cc.columbia.edu>); Sun, 29 Jan 1995 10:33:56 -0500
Received: by apakabar.cc.columbia.edu id AA07319
(5.65c+CU/IDA-1.4.4/HLK for kermit.misc@watsun); Sun, 29 Jan 1995 10:33:54 -0500
Path: news.columbia.edu!watsun.cc.columbia.edu!jaltman
From: jaltman@watsun.cc.columbia.edu (Jeffrey Altman)
Newsgroups: comp.protocols.kermit.misc,comp.os.os2.networking.tcp-ip
Subject: Re: Using MS-Kermit(3.13) with OS/2 2.11 + TCP 2.0
Date: 29 Jan 1995 15:33:52 GMT
Organization: Columbia University
Lines: 43
Message-Id: <3ggch0$74l@apakabar.cc.columbia.edu>
References: <17332DA68.CMSFJK@uga.cc.uga.edu>
Nntp-Posting-Host: watsun.cc.columbia.edu
Xref: news.columbia.edu comp.protocols.kermit.misc:1758 comp.os.os2.networking.tcp-ip:15534
Apparently-To: kermit.misc@watsun.cc.columbia.edu
In article <17332DA68.CMSFJK@uga.cc.uga.edu>,
F.J.Kelley <CMSFJK@UGA.CC.UGA.EDU> wrote:
>Hi Net,
>Apologies if this is going to the wrong group, or is already answered
>elsewhere, but ....
>I am using OS/2 2.11 and IBMs TCP 2.0 ... both are working fine. The
>problem comes in communicating with a CDC Cyber 960 mainframe running
>NOS. NOS can provide a full screen environment, and has an editor
>(FSE) that really likes such an environment. When I used DOS, I
>could use both MSKermit and CUTCP to connect to our Cyber with no
>problems (we wrote an xlate table for the Cyber)...but I have not
>been successful in setting up similiar tables for either C-Kermit
>for OS/2 or the Telnet package that comes with IBMs TCP. So I though
>I'd see whether I could use MSKermit to make the telnet connection, but
>no luck. Is anyone using such a combination with success? I would
>appreciate any information you might have, thanks,
>-- Joe Kelley jkelley@uga.cc.uga.edu
You cannot use MS-DOS Kermit in OS/2 for Telnet without being able to
dedicate a separate Network card to its DOS session.
However, the xlate table you create for the Cyber should work for C-Kermit.
The question is where is the xlate table installed. I assume that it is
a table that defines a terminal emulation and keyboard setup. Correct?
If so, then what you need to do is create a keyboard map file that
sets the keys up so that they match those that you are using in MS-DOS
Kermit.
Take a look at CKOVTK2.INI for an example of a complete VT220 keyboard
layout.
Be sure to be using C-Kermit for OS/2 5A(190), not 5A(189).
ftp from kermit.columbia.edu /kermit/archives/cko190.zip
Jeffrey Altman * PO Box 220415 * Great Neck, NY * 11022-0415 * (516) 466-5495
"C-Kermit: available on more platforms than any other communications software."
"Kermit FTP: sending files whenever and wherever they are needed."
OS/2 version 5A(190): ftp://kermit.columbia.edu/kermit/archives/cko190.zip